EnsiFerrum

As the current Fanalab does not have F1-2020 support , here is a workaround for you: Open "C:\Users\EnsiF\AppData\Local\Fanatec\FanaLab\xml\Configuration.xml" with a texteditor (UltraEdit, UE-Studio, Notepad ++) Replace <Game majorId="4" minorId="5" isHidden="False" isSupported="True" isFavorite="False"> <title>F1 2019</title> <img>f1_2019.jpg</img> <exe>F1_2019.exe</exe> <exe>F1_2019_dx12.exe</exe> <steamlaunch id="928600" isSteamInstalled="True">steam://rungameid/928600</steamlaunch> <exelaunch isExeSettable="true" isExeLaunch="False"> </exelaunch> <inipath> </inipath> <recommendedFFBLink>https://www.fanatec.com/forum/discussion/843/f1-2019-pc-fanatec-recommended-settings/p1</recommendedFFBLink> <deviceSettings> </deviceSettings> <supportedTelemetry>CountCar Fuel_F Fuel_I Gear IsDrsInAction IsDrsAllowed IsInGame IsInPit IsPitLimiterOn IsTcInAction LapNumber LapTotal MaxRPM Position RPM iRPM Sector Speed TimeLapBest TimeLapCurrent TimeLapLast Brake Clutch Steering Throttle SuspensionTravel WheelAngularSpeed IsFlagRed IsFlagYellow IsFlagBlue IsFlagGreen iERS</supportedTelemetry> </Game> with <!-- <Game majorId="4" minorId="5" isHidden="False" isSupported="True" isFavorite="False"> <title>F1 2019</title> <img>f1_2019.jpg</img> <exe>F1_2019.exe</exe> <exe>F1_2019_dx12.exe</exe> <steamlaunch id="928600" isSteamInstalled="True">steam://rungameid/928600</steamlaunch> <exelaunch isExeSettable="true" isExeLaunch="False"> </exelaunch> <inipath> </inipath> <recommendedFFBLink>https://www.fanatec.com/forum/discussion/843/f1-2019-pc-fanatec-recommended-settings/p1</recommendedFFBLink> <deviceSettings> </deviceSettings> <supportedTelemetry>CountCar Fuel_F Fuel_I Gear IsDrsInAction IsDrsAllowed IsInGame IsInPit IsPitLimiterOn IsTcInAction LapNumber LapTotal MaxRPM Position RPM iRPM Sector Speed TimeLapBest TimeLapCurrent TimeLapLast Brake Clutch Steering Throttle SuspensionTravel WheelAngularSpeed IsFlagRed IsFlagYellow IsFlagBlue IsFlagGreen iERS</supportedTelemetry> </Game> --> <Game majorId="4" minorId="5" isHidden="False" isSupported="True" isFavorite="False"> <title>F1 2020</title> <img>f1_20120.jpg</img> <exe>F1_2020.exe</exe> <exe>F1_2020_dx12.exe</exe> <steamlaunch id="1080110" isSteamInstalled="True">steam://rungameid/1080110</steamlaunch> <exelaunch isExeSettable="true" isExeLaunch="False"> </exelaunch> <inipath> </inipath> <recommendedFFBLink>https://www.fanatec.com/forum/discussion/843/f1-2019-pc-fanatec-recommended-settings/p1</recommendedFFBLink> <deviceSettings> </deviceSettings> <supportedTelemetry>CountCar Fuel_F Fuel_I Gear IsDrsInAction IsDrsAllowed IsInGame IsInPit IsPitLimiterOn IsTcInAction LapNumber LapTotal MaxRPM Position RPM iRPM Sector Speed TimeLapBest TimeLapCurrent TimeLapLast Brake Clutch Steering Throttle SuspensionTravel WheelAngularSpeed IsFlagRed IsFlagYellow IsFlagBlue IsFlagGreen iERS</supportedTelemetry> </Game> You need to set F1-2020 telemetry to F1-2019!!

Ah, sure, makes sense. My bad I forgot about this. Thanks a lot.

@Hoo UDP Data in My Team is only in 2020 format?

Just want to come back to the topic for the correct numbers for the LEDs. @Hoo Any way we can get this information, please. It is really time consuming to read it out with eyeballing them. THX in advance.

AFAIK the pictures for the supported games are embedded in the fanalab.exe. So you can do nothing to get a picture for F1-2020. Just wait for an official update of Fanalab.

After seeing the race last weekend, I thinkt the numbers for the engine supplier in My Team needs a revision. Correct order should be: Honda Ferrari Renault Mercedes Hope this will be fixed in a future patch.

In case you get some strange behaviour: Lower the update frequency to 30Hz

1. A detailed description of the issue. Please include any error codes here. BBal always get set to 50 when changing BBal - for the first time without the MFD open. or BBal always get set to 51 when changing BBal + for the first time without the MFD open. I have mapped BBal to the right thumb wheel on the Fanatec F1-2019 wheel. 2. What version of the game you are using (Shown on the start screen in the bottom left corner of the screen) 1.03 3. Game-mode? Every game mode 4. What are your replication numbers? Minimum test attempts are 4. Please also add EXACT replication steps for us to try too. Tried it way more than 4 times. Replication: Assign a shortcut for BBal + and BBal - Hit the track Use the shortcut to change BBal 5. What troubleshooting have you attempted? Please always try to attempt to fix the issue Open MFD before changing BBal -> in an infight this is a NoGo 6. What peripherals are you are using (gamepad, wheel make & model etc) See signature 7. Any screenshots or video of the issue? If the video is long, please include a timestamp for when the issue appears. https://youtu.be/MvZNPrSchsA

Thanks for the update. Espacially like "Added the MFD panel index to the PacketCarTelemetryData to identify what HUD screen the player is currently viewing" 😉 May I remind you to a post from week one I currently not able to find. I asked for the values when the RPM Leds light up. Well, we developers can read them out, but this is inveting the wheel for the 42nd time. Other game (sim) developers give me the numbers, some when a new car is added and I don't have to ask, some I have to ask. I am currently a bit short of time (new job incoming and wont leave my old job in a mess and chaos) and therefore I have to put priorities ....

I need the index of the current shown HUD page. CarSetupPanel -> Index = 0 PitSetupPanel -> Index = 1 CarDamagePanel -> Index = 2 CarEnginePanel -> Index = 3 CarTemperaturePanel -> Index = 4 Any possibilty to get this info?

Assetto Corsa Competizione Dirt Rally 2 Automobilista 2 i-Racing Wreckfest

I've already updated everything, except you old OS Windows 7 is dead!

THX. I looked them up on sunday for my self. Might wanna do your (app-writing) community mamabers a favour? Keep the documentation up to date.

And what about the 2019 F2 teams? My app reads 49 as the team, let alone there is no team nr. 49 in the table.

OK, first test positiv as well as negativ. + Top buttons in the Podium Advanced Paddles now working + Left rotary on the F1-2019 rim now recognizes all positions - Left rotary shows "40" for 2 positions, then counts on with 41, 42, etc. Functionality is ok. - Right rotary not all positions recognized Once with professionals ....

Got my Podium Advanced Paddles today and mounting them at the moment. Will have a look in a few minutes (15 - 20 minutes, mounting them is a job for someone who killed father and mother! Made from engineers for engineers.) Will report later.

Just set the Aspect Ratio to auto. Problem solved. Have the same monster display on my Rig and with auto all is well.

Hope the rotaries on the Fanatec F1-2019 will both work with all positions recognized

Some guy from the SimHub community has this already in the works: SPOILER_HaloTestF12019.mp4 "So I grabbed a screenshot of the released gameplay footage of F1 2019...the halo has changed a little bit but it lines up quite nicely with the camera view...." But would be nice to have it built in the game. And no, it is not my own work. I do stuff like this

If you want to sync the offline data with your racenet I suggest you do it the following way: "Zip" the local data Try to upload the date Upload ok? Finish it! Close the connection! Upload not ok? Try it again later. Keep a local copy of the data. In its current state the racenet is the cause I do not encourage my colleagues to buy Dirt Rally 2.

Entering the Racenet Event, F1-2014 starts new, save is corrupt. Hope this gets fixed asap!!! You morons @ codemasters are doing the same mistakes again and again and again and again ..... !!! Yes I am upset and pissed!!!

Steam is currently updating (?) Grid Autosport. Changelog? Mirrors included?

Quick question: Will FP1 and FP2 return in F1-2014? I hope so, cause only 60 Minutes of practice is not enough to get a good setup! Another question: What about dedicated servers for F1-2015? The P2P model we have right now is sub-optimal, to be honest!

Is there a new Update for GA? Steam is currently downloading 281,6MB. Is there a changelog????

A sentence from the year 1970. And Houston managed it to solve the problem. In time. The problem we have is as follows: I start a season in career, race 1 or 2 events and then say quit and save event. Then I leave the game. When I start the game again the only option I have is to start new season. If I did not leave the game, I have the option to load a season. I don't have the time to play an entire season in one session!!! Fix appreciated ASAP, please.