Jump to content


  • Content Count

  • Joined

  • Last visited

Posts posted by GioProductions

  1. 1 minute ago, issueskid said:

    That is interesting, there is no difference between RHS and LHS but the buttkicker works by being fed low frequencies so the broadcast mix might be affecting this. I'll stick in a bug and see if we can investigate this.

    If i need to test anything, just let me know ok?

    • Like 1

  2. 35 minutes ago, issueskid said:

    Thanks for the comments. While we obviously can't implement everybody's feedback we do try to sift through comments and make improvements year on year based on what the fans are asking for. Always happy to reply and give a little insight into our decision making (within reason).

    I have a buttkicker Gamer 2, but i have in F1 2020 that only the Right wheels of my F1 car do really rumble when touching the curbs, for example in Austria and Zandvoort. If i touch the Curbs with my Left wheels, it doesnt rumble

    Can it be that the sound (that causes the Buttkicker Gamer 2 to rumble) for the Right wheels are different then the one on the Left side?

    I am trying to understand why the Buttkicker Gamer 2 react differently on the Right/Left wheels

    Ps4 Pro and Broadcast Mix in ON. I don't use Sim Hub or anything  just the Buttkicker connecteded to the Buttkicker Amplifier and then with a optical output converter to the Ps4 Pro



  3. This is really a bad thing/decision.

    I have, since F1 2019,  the Thrustmaster F1 add on wheel and did map the shortcuts (ERS and Fuel) on my rotate buttons on the wheel:


    If you have this Shortcuts mapping option with Practise, why not have this same way in Qualifiying? It doesnt matter if you have only 2, 3 or even 5 modes in Qualifiying, the shortcuts button are there just for this, to quickly access them.

    For 2020 we already have a extra button for Overtake on/off, so to use extra buttons for ERS, is a bad design, as you know we are limited on buttons.

    @BarryBL have a look with the developers to understand our concern regarding this missing option

  4. 3 hours ago, tibtak said:

    I had my overtake button "on" when safety car got deployed. Somehow, I could not turn it off until the race resumed, which was a bit annoying because I could not recharge my batteries as much as I had hoped. We should be able to turn it on/off as wanted or at least have it disabled under safety car by default. 

    Maybe you can try to make a Bug Report for this with a video as evividence, so Codemasters can try to fix this with a patch

  5. 7 hours ago, martbloke said:

    Optional for sure although this new ERS is based of feedback from Lando, right? And didn't his engineer tell him to hold the OT button for 4 secs last weekend? Food for thought there 🤔

    I did see later on that video on Youtube and that was strange indeed "Hold the button for 4 seconds" :classic_blink:

  6. PS4 Pro

    F1 2020 audio: Broadcast Mix mode ON

    I just bought a Buttkicker Gamer 2 for on my Playseat. I dont use Sim Hub etc, just the Buttkicker with the Amplifier connected to my Ps4 Pro

    Question for the other Buttkicker Gamer 2 users:

    With F1 2020, i noticed that i only get heavy Curbs rumble effect with the Buttkicker on my Right F1 car wheels. Is this normal?

    I would expect Curbs rumble with all 4 F1 car wheels.

    Can you test this for me and let me know? So i know if it works correctly on F1 game  or need to make a bug report to Codemasters  

    Thanks in advance 👍


  7. 5 hours ago, Skroce said:

    Hi GioProductions, I've seen firmware update videos that show the Wheel Control Panel and each bar (for clutch, brake and gas) in the Pedals section is showing 50% (see attached image of TM's latest firmware update pdf). More recently, though, I've seen videos where the values are 0%. My Control Panel shows the values as 0%.

    One thing I'm going to try tomorrow is to do what you suggested, but also use the bars in the Control Panel. I'm going to adjust which groove each pedal engages with until the bar gets to 100% when the pedal is fully depressed. Then try it in game and see if it works the same as before. I'll let you know how that goes. Thanks.


    "I'm going to adjust which groove each pedal engages with until the bar gets to 100% when the pedal is fully depressed"


    That is what i did

  8. I reconise this issue.

    I have the T3Pa pedals and i did open it up to change the spring in it and I had this issue also, but in my case, i did touch the potentiometer so it did not re-act the same way as before i opened it. It went from 0% to 100% with a small touch.

    Probably this is the same case with you?

    I would open it up and start your game and test it while changing the position of your potention meter and check with your in game settings how much % you get, while changing the potentionmeter.

    I hope this helps

  9. 7 hours ago, joefane said:

    Anyone got any tips on how to get used to a wheel when switching from a pad?

    I'm hoping to get a T300RS before the new game releases, probably second hand, unless anyone knows a cheap website for them, or someone is selling theirs cheap.

    The T300 is a good start! If you have the extra money, i would advise to start with the T300 RS GT edition. This one comes with a better, solid 3 pedal set!

    I did start my wheel use with that one and man man, i really did loved it, together with the F1 rim. So maybe that will be your next upgrade after getting used to the T300 Wheel.







    Now a days i have upgraded to the Thrustmaster T-GT, but still using the Thrustmaster F1 add on rim.

    Any futher question, let me know

  10. I was watching Aarava his Vietnam F1 2020 gameplay while he is using the Overtake button in the 2020 game.

    What i find strange on the MFD, and wondering what you guys think of this..

    The Fuel shows the mix in use, The ERS show the mode in use, The DRS light up in Green when in use..

    But when the Overtake button is in use, you don't see "Overtake" light up in the MFD, but the "Disable" option?

    Should it not be the other way around?

    When using Overtake button, you should see Overtake light up on the MFD.

    See for example from 2:15 min on..