Jump to content


  • Content Count

  • Joined

  • Last visited

Community Reputation

2 New Car Smell

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. @steviejay69 No - It was my bad. I left out the M when I told you before and the USB headers appear to be different, but its ok, because I used the USB3_4 front panel connector to plug in my wheelbase, and then pedals connected to wheelbase via RJ cable. Thanks.
  2. @steviejay69 Your Image is for the Bios section of z390 Pro4, and I have the z390M Pro4 - So I think I have the latest. Any settings in Fanalab that I should use or avoid?
  3. Ok - Got it. So at this point, I think I am ready for some driving. Should I use fanalab or no?
  4. @steviejay69 Thanks. I used the ASRock Bios update tool, but it did not load a newer bios. Where are you seeing that there is a newer bios than the one I have? If you could point me to it, so I can download it, I would appreciate it. Here is the download page for my motherboard which is the asrock z390m pro4 : https://www.asrock.com/MB/Intel/Z390M Pro4/index.us.asp#Download
  5. Thanks @steviejay69 Ok - I have Bios 5.0000 running now, and wheel and pedals are attached to computer with USB 2 Cable in header 3__4. USB headset is now in USB 3 port. I am attaching new dxdiag. I've installed the 380 RC driver, updated all the firmwares, including pedals via direct USB, and installed latest fanalab. ....in my spare time. I'll do some testing now. Let me know if there is anything else you think I should check. DxDiag.txt
  6. Ok - Thank you so much for your help. To rule out any issues (and to make it so I can update my system, I did a clean install of windows. Once I get everything plugged in, I'll send you the new file to confirm these updates.
  7. Ok - Thanks - Revised Link: https://docs.google.com/document/d/1KkC5JkPlMIADRbsVxIhCMeAM_XIT8d8CrB6cZpOBeD8/edit?usp=sharing
  8. Thanks @steviejay69 & @TeenierNeilb69. Here you go: https://docs.google.com/document/d/1KkC5JkPlMIADRbsVxIhCMeAM_XIT8d8CrB6cZpOBeD8/edit?usp=sharing I have not loaded the new 380 driver yet. This is a really weird bug because it seems like it only happens in a split second in the middle of a F1 2020 race. Seems like a connection issue between wheelbase and software, but not sure which software. It happens in an instant in the game.
  9. @BarryBL The issue I have with either of these ideas is that the day 1.12 was installed, it stopped working for me. No other changes. 😞 What changed on your end that would cause this? I also don't really understand how fanalab or the fanatec driver packs communicate with f1 2020. Is it all through telemetry data? or does it also have a native transfer of data? I am interested in the wheelbase and FFB data communication, as that is the connection that seems to break. Guessing it comes down to some interruption in fanalab and f1 2020. I do not understand why it would be specific to larger multiplayer lobbies (especially when it happens with just two same country live players and 16 AI's). I have a very stable wired internet connection (business class service) and never have any lag or weak connection indicators...??
  10. @BarryBL I have done a few of these recently (in the last week) - unranked public lobbies, some 3 lap, 5 lap, and 25%'ers and have never had this problem with these smaller lobbies.
  11. @BarryBL Answers to your questions Do you experience this when you are the host, or only if you are not. Both as a host and just as a participant Do you experience this in lobbies where there are a lot of racers only? So far it has happened in 3 Lobbies: 1. Participant: 16 Other Live Drivers 2. Participant: 18 Other Live Drivers 3. Host: 1 other Live Driver and 16 AI Can you do an online practice unranked session and it work as expected consistantly? Yes - No problems hosting or participating in Practice sessions or Qualifiers Do you have Project Cars installed? (Longshot, but an old theory from 2019) No.
  12. BTW @BarryBL - The setup works perfect in other sims and in all other areas of your title, except mutiplayer races, and it only started having this issue after your 1.2 update? So I am not sure how you would conclude that this was a hardware/firmware issue.
  13. Yes I do @BarryBL. Its all listed above. Not sure what that code does for you but I would be curious if you could see the error?