Jump to content Jump to content

FANATEC LED not working?


EnsiFerrum

Recommended Posts

According to the official supported peripherals list here and the in game menu Fanatec LED should be working! 
I also checked my "hardware_settings_config.xml":
<?xml version="1.0" encoding="UTF-8" ?>
<hardware_settings_config applyOOTB="false">
 <cpu name="Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz" processors="8" processorStride="1" processorBinding="1" />
 <graphics_card deviceId="0x1B80" rating="4">
  <resolution width="6020" height="1080" displayMode="1" vsync="false" vsyncInterval="auto">
   <refreshRate numerator="60000" denominator="1000" />
   <windowPosition x="0" y="0" />
   <outputMonitor index="1" />
   <aspectRatio auto="true" width="0" height="0" />
   <hdr mode="0" peakNits="1000" />
  </resolution>
 </graphics_card>
 <motion>
  <dbox enabled="false" />
  <udp enabled="true" broadcast="true" ip="127.0.0.1" port="20777" sendRate="60" />
 </motion>
 <antialiasing smaa="false" taa="true" checkerboard="false" />
 <ssao enabled="true" algorithm="3" />
 <ssrt enabled="true" quality="4" />
 <ssrt_shadows enabled="false" />
 <texture_streaming sizeInMiB="1024" texelDensityBias="0.0" concurrentTextureSwaps="1" />
 <led_display fanatecNativeSupport="true" sliProNativeSupport="false" sliProForceBrightness="127" />
 <anisotropic_filter level="16" />
 <lighting quality="2" />
 <postprocess motionBlur="true" godRays="true" depthOfField="true" lensStreak="true" lensFlare="true" bloom="true" />
 <shadows enabled="true" skyShadowMapSize="2048" skyShadowCascadeCount="4" skyShadowLowLod="false" worldShadowMapSize="2048" skyShadowMap32Bits="true" nightShadowMapSize="2048" nightShadowCharacterCast="true" nightShadowSourceCount="4" sampling="2" spotShadowMapSize="1024" spotShadowSampling="2" crowdInShadows="false" />
 <smoke_shadows enabled="true" mapSize="512" opacity="1.0" envOpacity="0.45" updateRate="2" />
 <advanced_smoke_shadows enabled="false" />
 <particles enabled="true" distanceScale="1.0" rate="1.0" high="true" />
 <crowd billboardPercentage="50" lod0Distance="4" lod1Distance="10" lod2Distance="25" lod3Distance="70" billboardDistance="700" finDistance="1000" lod0Quantity="5" lod1Quantity="20" lod2Quantity="50" lod3Quantity="300" billboardQuantity="2000" finQuantity="5000" propQuantity="50" />
 <vehicle_reflections envMapScale="2.0" envMapUpdateMode="alternate" envMapRenderMode="carsAndCharacters" cubeMapEnabled="true" cubeMapScale="2.0" cubeMapUpdateMode="all" />
 <mirrors mirrorsUpdateMode="both" mirrorsRenderMode="carsAndCharacters" treesInMirrors="true" crowdInMirrors="true" highDetailMirrors="true" highDetailTyresAndCar="true" particlesInMirrors="true" />
 <weather_effects rainSplashes="true" rainSheets="true" rainBeads="true" rainHigh="true" trackHeatHaze="true" planarReflectionsEnabled="true" planarReflectionsRTScale="1.0" planarReflectionsMipTailBlur="true" proceduralCloudRTScale="2.0" proceduralCloudTiling="7" proceduralCloudQuality="1" />
 <ground_cover enabled="true" grassFlattening="true" drawDistance="120.0" />
 <dynamic_hair quality="1" />
 <skidmarks enabled="true" parallax="true" />
 <skidmarks_blending enabled="false" />
 <audio radioDeviceId="" />
</hardware_settings_config>
The file says it is enabled.
Link to post
Share on other sites
Hi guys!

2 things to read to get started smoothly with your Fanatec hardware and SLIMax Mgr Pro:

Getting Started with Fanatec Hardware (100% FREE!)
http://www.eksimracing.com/f-a-q/getting-started-with-fanatec-and-slimax-manager/

F1 2017 Plugins Page Info/Installation:
(don't activate Broadcast Mode ;) )
http://www.eksimracing.com/forum/index.php?topic=4031.0

Hope this helps
Cheers,
z
Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...