RigorousTiger 0 Posted August 24, 2018 So after starting up the game I just went into time trial to test out the handling. As soon as I start driving, I notice that the in-game wheel is jittering over bumps and kurbs like you see would happen on a pad. Also, I noticed that the force feedback felt a bit odd. I investigated this by going full lock with my T300 while moving. However, in game the car was nowhere near full lock because of which I came to the conclusion that the game recognised my T300 as a pad. Because of this I went into the controller settings where I saw, to my surprise, that the game recognised my T300 fully and treated it as such. I went to change my in game ffb settings to test out different things to find out how to fix it but nothing worked. I even tried unplugging my keyboard as I thought it might be interfering with the game inputs as I didn't have a controller connected at that time but that didn't work. I tried unplugging and replugging my wheel, I searched for wheel firmware/driver updates, which I had no success with as I very recently already updated everything so it is on the most recent version. I also tried to make a completely new control scheme, which didn't work. I have also found out that I am not the only one with the issue with the T300. Idk what else to do as I have tried everything I could. Share this post Link to post Share on other sites
ForZaKRC 0 Posted August 24, 2018 Same here with the T300 on PC, hope u guys fix this soon Share this post Link to post Share on other sites
shootm3 8 Posted August 24, 2018 i use the T300RS i beleive it uses the same Servo? its only the pedals that are different? and i didnt have any issues in the game with control scheme's etc. unless im just used to it from the Beta, rather than straight from F1 2017 to the new game.There is a glitch with the wheels animation bouncing around, but from what i can tell that doesnt affect the steering wheel bouncing around in my hands. etc.might be worth re-installing thrusmaster drivers etc.. Share this post Link to post Share on other sites
Noobiix007 0 Posted August 24, 2018 Hey, if you guys are using the F1 addon by thrustmaster, simply set it to the Advanced Mode in your profiler, it does the job for me, I can finally play the game like it's meant, FFB is quite good too.Some settings: PROFILER: 360 degrees, and in order: 85, 85, 85, 0, and 0 by the game. ADVANCED MODE.In game, you can adjust to your liking.Hopefully this will solve the problem for you guys ! Share this post Link to post Share on other sites
RigorousTiger 0 Posted August 24, 2018 Noobiix007 said: Hey, if you guys are using the F1 addon by thrustmaster, simply set it to the Advanced Mode in your profiler, it does the job for me, I can finally play the game like it's meant, FFB is quite good too.Some settings: PROFILER: 360 degrees, and in order: 85, 85, 85, 0, and 0 by the game. ADVANCED MODE.In game, you can adjust to your liking.Hopefully this will solve the problem for you guys ! I have the GTE rim so can't do that Share this post Link to post Share on other sites
RigorousTiger 0 Posted August 24, 2018 shootm3 said: i use the T300RS i beleive it uses the same Servo? its only the pedals that are different? and i didnt have any issues in the game with control scheme's etc. unless im just used to it from the Beta, rather than straight from F1 2017 to the new game.There is a glitch with the wheels animation bouncing around, but from what i can tell that doesnt affect the steering wheel bouncing around in my hands. etc.might be worth re-installing thrusmaster drivers etc.. Tried everything from re-installing drivers to simple things like unplugging and replugging. Still the same problem Share this post Link to post Share on other sites
NoseyGuyy 5 Posted August 24, 2018 It's a recurring problem from the beta. We've tried everything to fix it, nothing seemingly works, if you've got it then you've got it, and if you don't then lucky you. Nobody knows the cause of it, and it's not easily replicated so God knows when we'll get a fix for it. Share this post Link to post Share on other sites
RigorousTiger 0 Posted August 24, 2018 NoseyGuyy said: It's a recurring problem from the beta. We've tried everything to fix it, nothing seemingly works, if you've got it then you've got it, and if you don't then lucky you. Nobody knows the cause of it, and it's not easily replicated so God knows when we'll get a fix for it. Yeah, cos that is definitely going to not make me very angry and make me feel like I just wasted my money... Share this post Link to post Share on other sites
Sebi2a 0 Posted August 24, 2018 Hey, i'm having the exact same issue with my T300RS, and this is really annoying, hopefully we will have a fix soon because i basically can't really play the game in this state right now Share this post Link to post Share on other sites
Hoo 164 Posted August 24, 2018 Please can everyone having this issue confirm the following details:Platform (assuming PC for this)Wheel model number and rimPedalsMethod of hooking up pedals and wheels to your PCWheel firmwareTM driver versionTM Driver settingsWindows OS versionSteering wheel modeAction map selected in gameIn-game FFB settingsThanks Share this post Link to post Share on other sites
Sebi2a 0 Posted August 24, 2018 Update: I guess they are aware of the issue : https://twitter.com/Formula1game/status/1032987292959469568 Share this post Link to post Share on other sites
RigorousTiger 0 Posted August 24, 2018 Hoo said: Please can everyone having this issue confirm the following details:Platform (assuming PC for this)Wheel model number and rimPedalsMethod of hooking up pedals and wheels to your PCWheel firmwareTM driver versionTM Driver settingsWindows OS versionSteering wheel modeAction map selected in gameIn-game FFB settingsThanks PCThrustmaster T300 with Ferrari GTE rimT3PAUSB28.002.10.9.0 (Firmware and driver are fully up to date as updated recently and reinstalled today)360 degrees, 75% strenght, 100% constant and periodic, 0% Spring and damper, auto-centre set by gameWindows 10PS3I attempted regular T300, T300 GTE and custome T300Calibration all on 0, FFB: On, strenght: 120, on track, rumble strip and off track all on 20, damper at 100 and understeer is On (I have tried playing around with those settings) Share this post Link to post Share on other sites
Sebi2a 0 Posted August 24, 2018 Platform : PCWheel model number and rim : T300RS, default rimPedals : T3PAMethod of hooking up pedals and wheels to your PC : USB 2.0Wheel firmware : i had the version 25, and update to version 28, both have the issue TM driver version : 2.10.9.0TM Driver settings : 360°deg, 75%strenght, 100% constant, 100% periodic, 100% spring, 0% dampeurWindows OS version : Win10 ProSteering wheel mode : PS3Action map selected in game : tried default T300 and T300 F1, and tried to use a custom T300In-game FFB settings : calibration all on 0 , FFB : on, strenght : 35 on track : 0, rumble strip : 10, off track : 20, damper : 10 and underster is off (i also tried to mess with every settings but the issue was still here) Share this post Link to post Share on other sites
dennisukala 0 Posted August 24, 2018 Platform: PCWheel model number and rim: T300 Ferrari Integral Alcantara Edition, default rimPedals: T3PAMethod of hooking up pedals and wheels to your PC: USB 2.0Wheel firmware: 25TM driver version: 2.10.9.0TM Driver settings: 360° - 75% strenght - constant, periodic, spring, damper all 100% - Auto-center through gameWindows OS version: Windows 10Steering wheel mode: PS3Action map selected in game: Custom T300 (also tried default T300)In-game FFB settings: Default Share this post Link to post Share on other sites
Kerkeyon 0 Posted August 24, 2018 Platform : PCWheel model number and rim : T300RS with standard rimPedals : stockMethod of hooking up pedals and wheels to your PC : USB 2.0Wheel firmware : 28.00TM driver version : 2.10.9.0TM Driver settings : 360°deg, 75%strenght, 100% constant, 100% periodic, 0% spring, 0% damper, auto-center set by gameWindows OS version : Win7Steering wheel mode : PS3Action map selected in game : default t300, custom t300In-game FFB settings : overall ffb strength 60%, rest default Share this post Link to post Share on other sites
xPiGeOnNiNjA 0 Posted August 24, 2018 Platform PS4Wheel model number and rim T300 RS (basic normal rim)Pedals T3PAMethod of hooking up pedals and wheels to your PS4 USBWheel firmware N/ATM driver version N/ATM Driver settings N/AWindows OS version N/ASteering wheel mode PS4Action map selected in game T300 setupIn-game FFB settings All default Share this post Link to post Share on other sites
xPiGeOnNiNjA 0 Posted August 24, 2018 I think I have found a temporary fix that might help with a permanent one. What I did was turn the saturation up in game until it recognised full lock at 180° (so a 360° full rotation). Then when I went in game, I turned the saturation back down to 0 and it worked as intended with full lock on my wheel being full lock in game. I am on the PS4 btw, might be different for PC Share this post Link to post Share on other sites
RigorousTiger 0 Posted August 24, 2018 xPiGeOnNiNjA said: I think I have found a temporary fix that might help with a permanent one. What I did was turn the saturation up in game until it recognised full lock at 180° (so a 360° full rotation). Then when I went in game, I turned the saturation back down to 0 and it worked as intended with full lock on my wheel being full lock in game. I am on the PS4 btw, might be different for PC So just turning saturation up and down again, both times in game? Share this post Link to post Share on other sites
xPiGeOnNiNjA 0 Posted August 24, 2018 Nevermind, went back into the garage and now it doesn't work again... Share this post Link to post Share on other sites
xPiGeOnNiNjA 0 Posted August 24, 2018 RigorousTiger said: xPiGeOnNiNjA said: I think I have found a temporary fix that might help with a permanent one. What I did was turn the saturation up in game until it recognised full lock at 180° (so a 360° full rotation). Then when I went in game, I turned the saturation back down to 0 and it worked as intended with full lock on my wheel being full lock in game. I am on the PS4 btw, might be different for PC So just turning saturation up and down again, both times in game? Yeah, it does work but basically every time you go back to the garage, just do it again when you head out again and so far has fixed the issue for me Share this post Link to post Share on other sites
RigorousTiger 0 Posted August 24, 2018 xPiGeOnNiNjA said: RigorousTiger said: xPiGeOnNiNjA said: I think I have found a temporary fix that might help with a permanent one. What I did was turn the saturation up in game until it recognised full lock at 180° (so a 360° full rotation). Then when I went in game, I turned the saturation back down to 0 and it worked as intended with full lock on my wheel being full lock in game. I am on the PS4 btw, might be different for PC So just turning saturation up and down again, both times in game? Yeah, it does work but basically every time you go back to the garage, just do it again when you head out again and so far has fixed the issue for me Didn't work for me, especially as the game does recognise me being in full lock at 180 degrees (or 360, whatever) but it treats my wheel like a pad where it doesn't go on full lock depending on how quickly you go, just like when you put full input in a pad and it doesn't go full lock in game Share this post Link to post Share on other sites
Sebi2a 0 Posted August 24, 2018 RigorousTiger said: xPiGeOnNiNjA said: RigorousTiger said: xPiGeOnNiNjA said: I think I have found a temporary fix that might help with a permanent one. What I did was turn the saturation up in game until it recognised full lock at 180° (so a 360° full rotation). Then when I went in game, I turned the saturation back down to 0 and it worked as intended with full lock on my wheel being full lock in game. I am on the PS4 btw, might be different for PC So just turning saturation up and down again, both times in game? Yeah, it does work but basically every time you go back to the garage, just do it again when you head out again and so far has fixed the issue for me Didn't work for me, especially as the game does recognise me being in full lock at 180 degrees (or 360, whatever) but it treats my wheel like a pad where it doesn't go on full lock depending on how quickly you go, just like when you put full input in a pad and it doesn't go full lock in game Didn't work, still feels like a pad for me aswell. Share this post Link to post Share on other sites
dariusraulea 0 Posted August 24, 2018 @Hoo any updates on the issue? How is it going? Share this post Link to post Share on other sites
FRACTURED 30 Posted August 24, 2018 Why not just refund until the appropriate patch is released, isn't the wheel on supported list? If they've known since the beta they've already had 6 or 8 weeks minimum. Share this post Link to post Share on other sites
RigorousTiger 0 Posted August 24, 2018 FRACTURED said: Why not just refund until the appropriate patch is released, isn't the wheel on supported list? If they've known since the beta they've already had 6 or 8 weeks minimum. I can't as I didn't buy the game on steam :/ Share this post Link to post Share on other sites