Jump to content
  • 0
Sign in to follow this  

F1 2018 [PC] Logitech G29 Massive Issues

Question


http://imgur.com/gallery/OW2kyBM

There you can see the problem I'm experiencing.

First of all I play more driving games. My wheel works properly in all of them and my drivers are updated. 

Wheel seems to have 0% resistance (even though I put It Up to 85%) and steers constantly to the right.

I don't know if Maybe it's my fault changing the steering wheel turn angle from 900 to 180 in the Logitech Gaming Center. But I did the same with the F1 2017 and everything was OK.

Clutch also was switched with the accelerator but i managed to change the profile and change that. 

Please I need some Help cause I cannot play like this. Thanks!

Share this post


Link to post
Share on other sites

5 answers to this question

Recommended Posts

  • 0
So when your steering wheel is in the centered position the in game wheel is turned to the right every so slightly. This is the problem I am having. When my Logitech wheel is centered, on the game the car start veering off to the right. When I'm going at high speeds it is very bad. One minute i'm on the left of the track and next thing i'm on the right of the track Do you have the same issue?

Share this post


Link to post
Share on other sites
  • 0
Hey someone on steam forums replied This fixed it for me

I bet you own PCars 2. The fix from a 2017 post is quoted below;

"I had this issue for the first time like 2 months ago, and drove me nuts, I knew it was a software problem, but couldn't find a proper fix. Uninstalling LGS and cleaning registry only works until you start Project Cars again.

Project Cars 2 delete and modifies system keys from registry.

Only yesterday I installed RegShot to monitor registry changes and it's clear that Project Cars deletes and modifies entries in HKU\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_046D&PID_C24F, especially the OEM Name and OEM data entries. Restoring these fields fixes the problems with clutch becoming the accelerator and vice-versa and the loss of feedback.
This has to be done every time you played Project Cars. You need default keys values, ideally a registry back-up with that data. No need to reinstall LGS or unplug the wheel

Go to HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_046D&PID_C24F

Test this values, it works for me:

OEMName: "Logitech G29 Driving Force Racing Wheel USB" instead of "G29 Driving Force Racing Wheel"

OEMData: 43 00 08 10 19 00 00 00 instead of 00 00 00 10 00 00 00 00"

Share this post


Link to post
Share on other sites
  • 0
A common issue with G29 and G920.

No need for any settings changes

After reboot of machine.  Before you start the game, turn the wheel fully counter clockwise and the clockwise.

works everytime to overcome the off centre pull you always get when you first drive in game.

Share this post


Link to post
Share on other sites
  • 0
Best solution until now. Every time that I play PC2, have to go to registry and modify again.
Same thing backing to F1 2018.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×