Jump to content Jump to content

F1 2018 [PC] Logitech G29 Massive Issues


Recommended Posts


There you can see the problem I'm experiencing.

First of all I play more driving games. My wheel works properly in all of them and my drivers are updated. 

Wheel seems to have 0% resistance (even though I put It Up to 85%) and steers constantly to the right.

I don't know if Maybe it's my fault changing the steering wheel turn angle from 900 to 180 in the Logitech Gaming Center. But I did the same with the F1 2017 and everything was OK.

Clutch also was switched with the accelerator but i managed to change the profile and change that. 

Please I need some Help cause I cannot play like this. Thanks!
Link to post
Share on other sites
So when your steering wheel is in the centered position the in game wheel is turned to the right every so slightly. This is the problem I am having. When my Logitech wheel is centered, on the game the car start veering off to the right. When I'm going at high speeds it is very bad. One minute i'm on the left of the track and next thing i'm on the right of the track Do you have the same issue?
Link to post
Share on other sites
Hey someone on steam forums replied This fixed it for me

I bet you own PCars 2. The fix from a 2017 post is quoted below;

"I had this issue for the first time like 2 months ago, and drove me nuts, I knew it was a software problem, but couldn't find a proper fix. Uninstalling LGS and cleaning registry only works until you start Project Cars again.

Project Cars 2 delete and modifies system keys from registry.

Only yesterday I installed RegShot to monitor registry changes and it's clear that Project Cars deletes and modifies entries in HKU\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_046D&PID_C24F, especially the OEM Name and OEM data entries. Restoring these fields fixes the problems with clutch becoming the accelerator and vice-versa and the loss of feedback.
This has to be done every time you played Project Cars. You need default keys values, ideally a registry back-up with that data. No need to reinstall LGS or unplug the wheel

Go to HKEY_CURRENT_USER\System\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_046D&PID_C24F

Test this values, it works for me:

OEMName: "Logitech G29 Driving Force Racing Wheel USB" instead of "G29 Driving Force Racing Wheel"

OEMData: 43 00 08 10 19 00 00 00 instead of 00 00 00 10 00 00 00 00"
Link to post
Share on other sites
  • 4 weeks later...


This topic is now archived and is closed to further replies.

  • Create New...