Jump to content
Want to report an issue? Have a bug to report? Please look here first!!!! Read more... ×

F1® 2020 | UDP Specification

Recommended Posts

The F1 series of games support the output of certain game data across UDP connections. This data can be used supply race information to external applications, or to drive certain hardware (e.g. motion platforms, force feedback steering wheels and LED devices).

The following information summarises these data structures so that developers of supporting hardware or software are able to configure these to work correctly with the F1 game.

If you cannot find the information that you require, or spot any issues with this specification then please let us know below. 

Packet Information

Packet Types

Each packet can now carry different types of data rather than having one packet which contains everything. A header has been added to each packet as well so that versioning can be tracked and it will be easier for applications to check they are interpreting the incoming data in the correct way. Please note that all values are encoded using Little Endian format. All data is packed.

The following data types are used in the structures:

Type

Description

uint8

Unsigned 8-bit integer

int8

Signed 8-bit integer

uint16

Unsigned 16-bit integer

int16

Signed 16-bit integer

float

Floating point (32-bit)

uint64

Unsigned 64-bit integer

Packet Header

Each packet has the following header:

struct PacketHeader
{
    uint16    m_packetFormat;             // 2020
    uint8     m_gameMajorVersion;         // Game major version - "X.00"
    uint8     m_gameMinorVersion;         // Game minor version - "1.XX"
    uint8     m_packetVersion;            // Version of this packet type, all start from 1
    uint8     m_packetId;                 // Identifier for the packet type, see below
    uint64    m_sessionUID;               // Unique identifier for the session
    float     m_sessionTime;              // Session timestamp
    uint32    m_frameIdentifier;          // Identifier for the frame the data was retrieved on
    uint8     m_playerCarIndex;           // Index of player's car in the array
    
   // ADDED IN BETA 2: 
    uint8     m_secondaryPlayerCarIndex;  // Index of secondary player's car in the array (splitscreen)
                                          // 255 if no second player
};

Packet IDs

The packets IDs are as follows:

Packet Name

Value

Description

Motion

0

Contains all motion data for player’s car – only sent while player is in control

Session

1

Data about the session – track, time left

Lap Data

2

Data about all the lap times of cars in the session

Event

3

Various notable events that happen during a session

Participants

4

List of participants in the session, mostly relevant for multiplayer

Car Setups

5

Packet detailing car setups for cars in the race

Car Telemetry

6

Telemetry data for all cars

Car Status

7

Status data for all cars such as damage

Final Classification

8

Final classification confirmation at the end of a race

Lobby Info

9

Information about players in a multiplayer lobby

 

Motion Packet

The motion packet gives physics data for all the cars being driven. There is additional data for the car being driven with the goal of being able to drive a motion platform setup.

N.B. For the normalised vectors below, to convert to float values divide by 32767.0f – 16-bit signed values are used to pack the data and on the assumption that direction values are always between -1.0f and 1.0f.

Frequency: Rate as specified in menus
Size: 1464 bytes (Packet size updated in Beta 3)
Version: 1

struct CarMotionData
{
    float         m_worldPositionX;           // World space X position
    float         m_worldPositionY;           // World space Y position
    float         m_worldPositionZ;           // World space Z position
    float         m_worldVelocityX;           // Velocity in world space X
    float         m_worldVelocityY;           // Velocity in world space Y
    float         m_worldVelocityZ;           // Velocity in world space Z
    int16         m_worldForwardDirX;         // World space forward X direction (normalised)
    int16         m_worldForwardDirY;         // World space forward Y direction (normalised)
    int16         m_worldForwardDirZ;         // World space forward Z direction (normalised)
    int16         m_worldRightDirX;           // World space right X direction (normalised)
    int16         m_worldRightDirY;           // World space right Y direction (normalised)
    int16         m_worldRightDirZ;           // World space right Z direction (normalised)
    float         m_gForceLateral;            // Lateral G-Force component
    float         m_gForceLongitudinal;       // Longitudinal G-Force component
    float         m_gForceVertical;           // Vertical G-Force component
    float         m_yaw;                      // Yaw angle in radians
    float         m_pitch;                    // Pitch angle in radians
    float         m_roll;                     // Roll angle in radians
};

struct PacketMotionData
{
    PacketHeader    m_header;               	// Header

    CarMotionData   m_carMotionData[22];    	// Data for all cars on track

    // Extra player car ONLY data
    float         m_suspensionPosition[4];      // Note: All wheel arrays have the following order:
    float         m_suspensionVelocity[4];      // RL, RR, FL, FR
    float         m_suspensionAcceleration[4];	// RL, RR, FL, FR
    float         m_wheelSpeed[4];           	// Speed of each wheel
    float         m_wheelSlip[4];               // Slip ratio for each wheel
    float         m_localVelocityX;         	// Velocity in local space
    float         m_localVelocityY;         	// Velocity in local space
    float         m_localVelocityZ;         	// Velocity in local space
    float         m_angularVelocityX;		    // Angular velocity x-component
    float         m_angularVelocityY;           // Angular velocity y-component
    float         m_angularVelocityZ;           // Angular velocity z-component
    float         m_angularAccelerationX;       // Angular velocity x-component
    float         m_angularAccelerationY;	    // Angular velocity y-component
    float         m_angularAccelerationZ;       // Angular velocity z-component
    float         m_frontWheelsAngle;           // Current front wheels angle in radians
};

 

Session Packet

The session packet includes details about the current session in progress.

Frequency: 2 per second
Size: 251 bytes (Packet size updated in Beta 3)
Version: 1

struct MarshalZone
{
    float  m_zoneStart;   // Fraction (0..1) of way through the lap the marshal zone starts
    int8   m_zoneFlag;    // -1 = invalid/unknown, 0 = none, 1 = green, 2 = blue, 3 = yellow, 4 = red
};

struct WeatherForecastSample
{
    uint8     m_sessionType;                     // 0 = unknown, 1 = P1, 2 = P2, 3 = P3, 4 = Short P, 5 = Q1
                                                 // 6 = Q2, 7 = Q3, 8 = Short Q, 9 = OSQ, 10 = R, 11 = R2
                                                 // 12 = Time Trial
    uint8     m_timeOffset;                      // Time in minutes the forecast is for
    uint8     m_weather;                         // Weather - 0 = clear, 1 = light cloud, 2 = overcast
                                                 // 3 = light rain, 4 = heavy rain, 5 = storm
    int8      m_trackTemperature;                // Track temp. in degrees celsius
    int8      m_airTemperature;                  // Air temp. in degrees celsius
};

struct PacketSessionData
{
    PacketHeader    m_header;                    // Header

    uint8           m_weather;                   // Weather - 0 = clear, 1 = light cloud, 2 = overcast
                                                 // 3 = light rain, 4 = heavy rain, 5 = storm
    int8	    m_trackTemperature;          // Track temp. in degrees celsius
    int8	    m_airTemperature;            // Air temp. in degrees celsius
    uint8           m_totalLaps;                 // Total number of laps in this race
    uint16          m_trackLength;               // Track length in metres
    uint8           m_sessionType;               // 0 = unknown, 1 = P1, 2 = P2, 3 = P3, 4 = Short P
                                                 // 5 = Q1, 6 = Q2, 7 = Q3, 8 = Short Q, 9 = OSQ
                                                 // 10 = R, 11 = R2, 12 = Time Trial
    int8            m_trackId;                   // -1 for unknown, 0-21 for tracks, see appendix
    uint8           m_formula;                   // Formula, 0 = F1 Modern, 1 = F1 Classic, 2 = F2,
                                                 // 3 = F1 Generic
    uint16          m_sessionTimeLeft;           // Time left in session in seconds
    uint16          m_sessionDuration;           // Session duration in seconds
    uint8           m_pitSpeedLimit;             // Pit speed limit in kilometres per hour
    uint8           m_gamePaused;                // Whether the game is paused
    uint8           m_isSpectating;              // Whether the player is spectating
    uint8           m_spectatorCarIndex;         // Index of the car being spectated
    uint8           m_sliProNativeSupport;	 // SLI Pro support, 0 = inactive, 1 = active
    uint8           m_numMarshalZones;           // Number of marshal zones to follow
    MarshalZone     m_marshalZones[21];          // List of marshal zones – max 21
    uint8           m_safetyCarStatus;           // 0 = no safety car, 1 = full safety car
                                                 // 2 = virtual safety car
    uint8           m_networkGame;               // 0 = offline, 1 = online
    uint8           m_numWeatherForecastSamples; // Number of weather samples to follow
    WeatherForecastSample m_weatherForecastSamples[20];   // Array of weather forecast samples
};

 

Lap Data Packet

The lap data packet gives details of all the cars in the session.

Frequency: Rate as specified in menus
Size: 1190 bytes (Struct updated in Beta 3)
Version: 1

struct LapData
{
    float    m_lastLapTime;               // Last lap time in seconds
    float    m_currentLapTime;            // Current time around the lap in seconds
  
    //UPDATED in Beta 3:
    uint16   m_sector1TimeInMS;           // Sector 1 time in milliseconds
    uint16   m_sector2TimeInMS;           // Sector 2 time in milliseconds
    float    m_bestLapTime;               // Best lap time of the session in seconds
    uint8    m_bestLapNum;                // Lap number best time achieved on
    uint16   m_bestLapSector1TimeInMS;    // Sector 1 time of best lap in the session in milliseconds
    uint16   m_bestLapSector2TimeInMS;    // Sector 2 time of best lap in the session in milliseconds
    uint16   m_bestLapSector3TimeInMS;    // Sector 3 time of best lap in the session in milliseconds
    uint16   m_bestOverallSector1TimeInMS;// Best overall sector 1 time of the session in milliseconds
    uint8    m_bestOverallSector1LapNum;  // Lap number best overall sector 1 time achieved on
    uint16   m_bestOverallSector2TimeInMS;// Best overall sector 2 time of the session in milliseconds
    uint8    m_bestOverallSector2LapNum;  // Lap number best overall sector 2 time achieved on
    uint16   m_bestOverallSector3TimeInMS;// Best overall sector 3 time of the session in milliseconds
    uint8    m_bestOverallSector3LapNum;  // Lap number best overall sector 3 time achieved on
  
  
    float    m_lapDistance;               // Distance vehicle is around current lap in metres – could
                                          // be negative if line hasn’t been crossed yet
    float    m_totalDistance;             // Total distance travelled in session in metres – could
                                          // be negative if line hasn’t been crossed yet
    float    m_safetyCarDelta;            // Delta in seconds for safety car
    uint8    m_carPosition;               // Car race position
    uint8    m_currentLapNum;             // Current lap number
    uint8    m_pitStatus;                 // 0 = none, 1 = pitting, 2 = in pit area
    uint8    m_sector;                    // 0 = sector1, 1 = sector2, 2 = sector3
    uint8    m_currentLapInvalid;         // Current lap invalid - 0 = valid, 1 = invalid
    uint8    m_penalties;                 // Accumulated time penalties in seconds to be added
    uint8    m_gridPosition;              // Grid position the vehicle started the race in
    uint8    m_driverStatus;              // Status of driver - 0 = in garage, 1 = flying lap
                                          // 2 = in lap, 3 = out lap, 4 = on track
    uint8    m_resultStatus;              // Result status - 0 = invalid, 1 = inactive, 2 = active
                                          // 3 = finished, 4 = disqualified, 5 = not classified
                                          // 6 = retired
};


struct PacketLapData
{
    PacketHeader    m_header;             // Header

    LapData         m_lapData[22];        // Lap data for all cars on track
};

 

Event Packet

This packet gives details of events that happen during the course of a session.

Frequency: When the event occurs
Size: 35 bytes (Packet size updated in Beta 3)
Version: 1

// The event details packet is different for each type of event.
// Make sure only the correct type is interpreted.
union EventDataDetails
{
    struct
    {
        uint8	vehicleIdx; // Vehicle index of car achieving fastest lap
        float	lapTime;    // Lap time is in seconds
    } FastestLap;

    struct
    {
        uint8   vehicleIdx; // Vehicle index of car retiring
    } Retirement;

    struct
    {
        uint8   vehicleIdx; // Vehicle index of team mate
    } TeamMateInPits;

    struct
    {
        uint8   vehicleIdx; // Vehicle index of the race winner
    } RaceWinner;

    struct
    {
    	uint8 penaltyType;          // Penalty type – see Appendices
        uint8 infringementType;     // Infringement type – see Appendices
        uint8 vehicleIdx;           // Vehicle index of the car the penalty is applied to
        uint8 otherVehicleIdx;      // Vehicle index of the other car involved
        uint8 time;                 // Time gained, or time spent doing action in seconds
        uint8 lapNum;               // Lap the penalty occurred on
        uint8 placesGained;         // Number of places gained by this
    } Penalty;

    struct
    {
        uint8 vehicleIdx; // Vehicle index of the vehicle triggering speed trap
        float speed;      // Top speed achieved in kilometres per hour
    } SpeedTrap;
};

struct PacketEventData
{
    PacketHeader    	m_header;             // Header
    
uint8           	m_eventStringCode[4]; // Event string code, see below
EventDataDetails	m_eventDetails;       // Event details - should be interpreted differently
                                              // for each type
};

 

Event String Codes

Event

Code

Description

Session Started

“SSTA”

Sent when the session starts

Session Ended

“SEND”

Sent when the session ends

Fastest Lap

“FTLP”

When a driver achieves the fastest lap

Retirement

“RTMT”

When a driver retires

DRS enabled

“DRSE”

Race control have enabled DRS

DRS disabled

“DRSD”

Race control have disabled DRS

Team mate in pits

“TMPT”

Your team mate has entered the pits

Chequered flag

“CHQF”

The chequered flag has been waved

Race Winner

“RCWN”

The race winner is announced

Penalty Issued

“PENA”

A penalty has been issued – details in event

Speed Trap Triggered

“SPTP”

Speed trap has been triggered by fastest speed

 

 

Participants Packet

This is a list of participants in the race. If the vehicle is controlled by AI, then the name will be the driver name. If this is a multiplayer game, the names will be the Steam Id on PC, or the LAN name if appropriate.

N.B. on Xbox One, the names will always be the driver name, on PS4 the name will be the LAN name if playing a LAN game, otherwise it will be the driver name. 

The array should be indexed by vehicle index.

Frequency: Every 5 seconds
Size: 1213 bytes (Packet size updated in Beta 3)
Version: 1

struct ParticipantData
{
    uint8      m_aiControlled;           // Whether the vehicle is AI (1) or Human (0) controlled
    uint8      m_driverId;               // Driver id - see appendix
    uint8      m_teamId;                 // Team id - see appendix
    uint8      m_raceNumber;             // Race number of the car
    uint8      m_nationality;            // Nationality of the driver
    char       m_name[48];               // Name of participant in UTF-8 format – null terminated
                                         // Will be truncated with … (U+2026) if too long
    uint8      m_yourTelemetry;          // The player's UDP setting, 0 = restricted, 1 = public
};

struct PacketParticipantsData
{
    PacketHeader    m_header;           // Header

    uint8           m_numActiveCars;	// Number of active cars in the data – should match number of
                                        // cars on HUD
    ParticipantData m_participants[22];
};

 

Car Setups Packet

This packet details the car setups for each vehicle in the session. Note that in multiplayer games, other player cars will appear as blank, you will only be able to see your car setup and AI cars.

Frequency: 2 per second
Size: 1102 bytes (Packet size updated in Beta 3)
Version: 1

 

struct CarSetupData
{
    uint8     m_frontWing;                // Front wing aero
    uint8     m_rearWing;                 // Rear wing aero
    uint8     m_onThrottle;               // Differential adjustment on throttle (percentage)
    uint8     m_offThrottle;              // Differential adjustment off throttle (percentage)
    float     m_frontCamber;              // Front camber angle (suspension geometry)
    float     m_rearCamber;               // Rear camber angle (suspension geometry)
    float     m_frontToe;                 // Front toe angle (suspension geometry)
    float     m_rearToe;                  // Rear toe angle (suspension geometry)
    uint8     m_frontSuspension;          // Front suspension
    uint8     m_rearSuspension;           // Rear suspension
    uint8     m_frontAntiRollBar;         // Front anti-roll bar
    uint8     m_rearAntiRollBar;          // Front anti-roll bar
    uint8     m_frontSuspensionHeight;    // Front ride height
    uint8     m_rearSuspensionHeight;     // Rear ride height
    uint8     m_brakePressure;            // Brake pressure (percentage)
    uint8     m_brakeBias;                // Brake bias (percentage)
    float     m_rearLeftTyrePressure;     // Rear left tyre pressure (PSI)
    float     m_rearRightTyrePressure;    // Rear right tyre pressure (PSI)
    float     m_frontLeftTyrePressure;    // Front left tyre pressure (PSI)
    float     m_frontRightTyrePressure;   // Front right tyre pressure (PSI)
    uint8     m_ballast;                  // Ballast
    float     m_fuelLoad;                 // Fuel load
};

struct PacketCarSetupData
{
    PacketHeader    m_header;            // Header

    CarSetupData    m_carSetups[22];
};

 

Car Telemetry Packet

This packet details telemetry for all the cars in the race. It details various values that would be recorded on the car such as speed, throttle application, DRS etc.

Frequency: Rate as specified in menus
Size: 1307 bytes (Packet size updated in Beta 3)
Version: 1

struct CarTelemetryData
{
    uint16    m_speed;                         // Speed of car in kilometres per hour
    float     m_throttle;                      // Amount of throttle applied (0.0 to 1.0)
    float     m_steer;                         // Steering (-1.0 (full lock left) to 1.0 (full lock right))
    float     m_brake;                         // Amount of brake applied (0.0 to 1.0)
    uint8     m_clutch;                        // Amount of clutch applied (0 to 100)
    int8      m_gear;                          // Gear selected (1-8, N=0, R=-1)
    uint16    m_engineRPM;                     // Engine RPM
    uint8     m_drs;                           // 0 = off, 1 = on
    uint8     m_revLightsPercent;              // Rev lights indicator (percentage)
    uint16    m_brakesTemperature[4];          // Brakes temperature (celsius)
    uint8     m_tyresSurfaceTemperature[4];    // Tyres surface temperature (celsius)
    uint8     m_tyresInnerTemperature[4];      // Tyres inner temperature (celsius)
    uint16    m_engineTemperature;             // Engine temperature (celsius)
    float     m_tyresPressure[4];              // Tyres pressure (PSI)
    uint8     m_surfaceType[4];                // Driving surface, see appendices
};

struct PacketCarTelemetryData
{
    PacketHeader    	m_header;	       // Header

    CarTelemetryData    m_carTelemetryData[22];

    uint32              m_buttonStatus;        // Bit flags specifying which buttons are being pressed
                                               // currently - see appendices

    // Added in Beta 3:
    uint8               m_mfdPanelIndex;       // Index of MFD panel open - 255 = MFD closed
                                               // Single player, race – 0 = Car setup, 1 = Pits
                                               // 2 = Damage, 3 =  Engine, 4 = Temperatures
                                               // May vary depending on game mode
    uint8               m_mfdPanelIndexSecondaryPlayer;   // See above
    int8                m_suggestedGear;       // Suggested gear for the player (1-8)
                                               // 0 if no gear suggested
};

 

Car Status Packet

This packet details car statuses for all the cars in the race. It includes values such as the damage readings on the car.

Frequency: Rate as specified in menus
Size: 1344 bytes (Packet updated in Beta 3)
Version: 1

struct CarStatusData
{
    uint8       m_tractionControl;          // 0 (off) - 2 (high)
    uint8       m_antiLockBrakes;           // 0 (off) - 1 (on)
    uint8       m_fuelMix;                  // Fuel mix - 0 = lean, 1 = standard, 2 = rich, 3 = max
    uint8       m_frontBrakeBias;           // Front brake bias (percentage)
    uint8       m_pitLimiterStatus;         // Pit limiter status - 0 = off, 1 = on
    float       m_fuelInTank;               // Current fuel mass
    float       m_fuelCapacity;             // Fuel capacity
    float       m_fuelRemainingLaps;        // Fuel remaining in terms of laps (value on MFD)
    uint16      m_maxRPM;                   // Cars max RPM, point of rev limiter
    uint16      m_idleRPM;                  // Cars idle RPM
    uint8       m_maxGears;                 // Maximum number of gears
    uint8       m_drsAllowed;               // 0 = not allowed, 1 = allowed, -1 = unknown
    

    // Added in Beta3:
    uint16      m_drsActivationDistance;    // 0 = DRS not available, non-zero - DRS will be available
                                            // in [X] metres
    
    uint8       m_tyresWear[4];             // Tyre wear percentage
    uint8       m_actualTyreCompound;	    // F1 Modern - 16 = C5, 17 = C4, 18 = C3, 19 = C2, 20 = C1
   					    // 7 = inter, 8 = wet
   					    // F1 Classic - 9 = dry, 10 = wet
   					    // F2 – 11 = super soft, 12 = soft, 13 = medium, 14 = hard
   					    // 15 = wet
   uint8       m_visualTyreCompound;        // F1 visual (can be different from actual compound)
                                            // 16 = soft, 17 = medium, 18 = hard, 7 = inter, 8 = wet
                                            // F1 Classic – same as above
                                            // F2 – same as above
    uint8       m_tyresAgeLaps;             // Age in laps of the current set of tyres
    uint8       m_tyresDamage[4];           // Tyre damage (percentage)
    uint8       m_frontLeftWingDamage;      // Front left wing damage (percentage)
    uint8       m_frontRightWingDamage;     // Front right wing damage (percentage)
    uint8       m_rearWingDamage;           // Rear wing damage (percentage)
    
    // Added Beta 3:
    uint8       m_drsFault;                 // Indicator for DRS fault, 0 = OK, 1 = fault
    
    uint8       m_engineDamage;             // Engine damage (percentage)
    uint8       m_gearBoxDamage;            // Gear box damage (percentage)
    int8        m_vehicleFiaFlags;          // -1 = invalid/unknown, 0 = none, 1 = green
                                            // 2 = blue, 3 = yellow, 4 = red
    float       m_ersStoreEnergy;           // ERS energy store in Joules
    uint8       m_ersDeployMode;            // ERS deployment mode, 0 = none, 1 = medium
                                            // 2 = overtake, 3 = hotlap
    float       m_ersHarvestedThisLapMGUK;  // ERS energy harvested this lap by MGU-K
    float       m_ersHarvestedThisLapMGUH;  // ERS energy harvested this lap by MGU-H
    float       m_ersDeployedThisLap;       // ERS energy deployed this lap
};

struct PacketCarStatusData
{
    PacketHeader    	m_header;           // Header

    CarStatusData	m_carStatusData[22];
};

 

Final Classification Packet

This packet details the final classification at the end of the race, and the data will match with the post race results screen. This is especially useful for multiplayer games where it is not always possible to send lap times on the final frame because of network delay.

Frequency: Once at the end of a race
Size: 839 bytes (Packet size updated in Beta 3)
Version: 1

struct FinalClassificationData
{
    uint8     m_position;              // Finishing position
    uint8     m_numLaps;               // Number of laps completed
    uint8     m_gridPosition;          // Grid position of the car
    uint8     m_points;                // Number of points scored
    uint8     m_numPitStops;           // Number of pit stops made
    uint8     m_resultStatus;          // Result status - 0 = invalid, 1 = inactive, 2 = active
                                       // 3 = finished, 4 = disqualified, 5 = not classified
                                       // 6 = retired
    float     m_bestLapTime;           // Best lap time of the session in seconds
    double    m_totalRaceTime;         // Total race time in seconds without penalties
    uint8     m_penaltiesTime;         // Total penalties accumulated in seconds
    uint8     m_numPenalties;          // Number of penalties applied to this driver
    uint8     m_numTyreStints;         // Number of tyres stints up to maximum
    uint8     m_tyreStintsActual[8];   // Actual tyres used by this driver
    uint8     m_tyreStintsVisual[8];   // Visual tyres used by this driver
};
struct PacketFinalClassificationData
{
    PacketHeader    m_header;                             // Header

    uint8                      m_numCars;                 // Number of cars in the final classification
    FinalClassificationData    m_classificationData[22];
};

 

Lobby Info Packet

This packet details the players currently in a multiplayer lobby. It details each player’s selected car, any AI involved in the game and also the ready status of each of the participants.

Frequency: Two every second when in the lobby
Size: 1169 bytes (Packet size updated in Beta 3)
Version: 1

struct LobbyInfoData
{
    uint8     m_aiControlled;            // Whether the vehicle is AI (1) or Human (0) controlled
    uint8     m_teamId;                  // Team id - see appendix (255 if no team currently selected)
    uint8     m_nationality;             // Nationality of the driver
    char      m_name[48];                // Name of participant in UTF-8 format – null terminated
                                         // Will be truncated with ... (U+2026) if too long
    uint8     m_readyStatus;             // 0 = not ready, 1 = ready, 2 = spectating
};

struct PacketLobbyInfoData
{
    PacketHeader    m_header;                       // Header

    // Packet specific data
    uint8               m_numPlayers;               // Number of players in the lobby data
    LobbyInfoData       m_lobbyPlayers[22];
};

 

Restricted data (Your Telemetry setting)

There is some data in the UDP that you may not want other players seeing if you are in a multiplayer game. This is controlled by the “Your Telemetry” setting in the Telemetry options. The options are:

  • Restricted (Default) – other players viewing the UDP data will not see values for your car
  • Public – all other players can see all the data for your car

Note: You can always see the data for the car you are driving regardless of the setting.

The following data items are set to zero if the player driving the car in question has their “Your Telemetry” set to “Restricted”:

Car status packet

  • m_fuelInTank
  • m_fuelCapacity
  • m_fuelMix
  • m_fuelRemainingLaps
  • m_frontBrakeBias
  • m_frontLeftWingDamage
  • m_frontRightWingDamage
  • m_rearWingDamage
  • m_engineDamage
  • m_gearBoxDamage
  • m_tyresWear (All four wheels)
  • m_tyresDamage (All four wheels)
  • m_ersDeployMode
  • m_ersStoreEnergy
  • m_ersDeployedThisLap
  • m_ersHarvestedThisLapMGUK
  • m_ersHarvestedThisLapMGUH
  • m_tyresAgeLaps

Share this post


Link to post
Share on other sites

FAQS

How do I enable the UDP Telemetry Output?

In F1 2020, UDP telemetry output is controlled via the in-game menus. To enable this, enter the options menu from the main menu (triangle / Y), then enter the settings menu - the UDP option will be at the bottom of the list. From there you will be able to enable / disable the UDP output, configure the IP address and port for the receiving application, toggle broadcast mode and set the send rate. Broadcast mode transmits the data across the network subnet to allow multiple devices on the same subnet to be able to receive this information. When using broadcast mode it is not necessary to set a target IP address, just a target port for applications to listen on.

Advanced PC Users: You can additionally edit the game’s configuration XML file to configure UDP output. The file is located here (after an initial boot of the game):

...\Documents\My Games\<game_folder>\hardwaresettings\hardware_settings_config.xml

You should see the tag:

<motion>  ...  
  <udp enabled="false" broadcast=”false ip="127.0.0.1" port="20777" sendRate=”20 format=”2020 yourTelemetry=”restricted />           
  ...
</motion>

 

Here you can set the values manually. Note that any changes made within the game when it is running will overwrite any changes made manually. Note the enabled flag is now a state.

 

What has changed since last year?

  • F1 2020 sees the following changes to the UDP specification:
  • Penalties have been added as a new Event Type
  • Weather forecast data is now available in session packets for upcoming sessions
  • Reduced the size of the surface and inner tyre temperature fields in the Car Telemetry to reduce overall packet size as more vehicles need to be added
  • My Team allows an extra team to race – this means that all the places in the packets where 20 cars were used, 22 are now needed. N.B. this will not be fixed in old formats (2019, 2018, legacy) – if you are in the “My Team” career mode with any format other than 2020 specified, no data will be output. All other game modes will function as before
  • Added Vietnamese and Barbadian nationalities
  • Added Final Classification packet for end of race results
  • Made m_gridPosition the actual numerical position, not 0-based (only in 2020 data)
  • Added Lobby Info packet to send data to UDP when in a multiplayer lobby
  • Added number of laps the current set of tyres have been used for in status packet
  • Split the tyre pressures in Car Setups packet into RL, RR, FL, FR to reflect the game changes
  • Added secondary player car index to packet headers for splitscreen
  • Added MFD Panel Index to the car telemetry packet for both players
  • Added best sector times and lap numbers to the laps packet as they cannot always be recorded correctly (e.g. fast-forwarding time) – N.B. the order has been slightly rearranged to tidy up
  • Changed all sector times in lap data packet to be in milliseconds (uint16 instead of float) to reduce packet size so other things can be added
  • Added indicator for DRS faults to the car status packet
  • Updated ERS mode values
  • Speed trap triggered event added
  • Added DRS activation distance to indicate whether the car has passed detection and DRS will be available in the subsequent activation zone
  • Suggested gear added to the car telemetry packet

 

What is the order of the wheel arrays?

All wheel arrays are in the following order:

0  Rear Left (RL)   
1  Rear Right (RR)   
2  Front Left (FL)   
3  Front Right (FR)

 

Do the vehicle indices change?

During a session, each car is assigned a vehicle index. This will not change throughout the session and all the arrays that are sent use this vehicle index to dereference the correct piece of data.

 

What encoding format is used?

All values are encoded using Little Endian format.

 

Are the data structures packed?

Yes, all data is packed, there is no padding used.

 

Will there always be 20 cars in the data structures?

No, for F1 2020, there is a new feature called “My Team” which allows an extra team to be present on the grid. This means that all previous places where 20 cars were used, 22 is now the maximum. If “My Team” is not active however, most games modes will act as before and have a maximum of 20. Note that if your UDP format is 2019, 2018 or legacy and you are in “My Team” career mode, no UDP output will be produced because of this imitation.

There is still the data item called m_numActiveCars in the participants packet which tells you how many cars are active in the race. However, you should check the individual result status of each car in the lap data to see if that car is actively providing data. If it is not “Invalid” or “Inactive” then the corresponding vehicle index has valid data.

 

How often are updated packets sent?

For the packets which get updated at “Rate as specified in the menus” you can be guaranteed that on the frame that these get sent they will all get sent together and will never be separated across frames. This of course relies on the reliability of your network as to whether they are received correctly as everything is sent via UDP. Other packets that get sent at specific rates can arrive on any frame.

If you are connected to the game when it starts transmitting the first frame will contain the following information to help initialise data structures on the receiving application:

Packets sent on Frame 1: (All packets sent on this frame have “Session timestamp” 0.000)

  • Session
  • Participants
  • Car Setups
  • Lap Data
  • Motion Data
  • Car Telemetry
  • Car Status

 

As an example, assuming that you are running at 60Hz with 60Hz update rate selected in the menus then you would expect to see the following packets and timestamps:

Packets sent on Frame 2: (All packets sent on this frame have “Session timestamp” 0.016)

  • Lap Data
  • Motion Data
  • Car Telemetry
  • Car Status

Packets sent on Frame 31: (All packets sent on this frame have “Session timestamp” 0.5)

  • Session (since 2 updates per second)
  • Car Setups (since 2 updates per second)
  • Lap Data
  • Motion Data
  • Car Telemetry
  • Car Status

 

Will my old app still work with F1 2020?

F1 2020 uses a new format for the UDP data. However, earlier formats of the data are still supported so that most older apps implemented using the previous data formats should work with little or no change from the developer. To use the old formats, please enter the UDP options menu and set “UDP Format” to either “F1 2019”, “F1 2018” or “Legacy” (for F1 2017 and earlier).

Specifications for the legacy format can be seen here: http://forums.codemasters.com/discussion/53139/f1-2017-d-box-and-udp-output-specification/p1.

Specifications for the F1 2018 format can be seen here: https://forums.codemasters.com/topic/30601-f1-2018-udp-specification/.

 

How do I enable D-BOX output?

D-BOX output is currently supported on the PC platform. In F1 2020, the D-BOX activation can be controlled via the menus. Navigate to Game Options->Settings->UDP Telemetry Settings->D-BOX to activate this on your system.

 

Advanced PC Users: It is possible to control D-BOX by editing the games’ configuration XML file. The file is located here (after an initial boot of the game):

...\Documents\My Games\<game_folder>\hardwaresettings\hardware_settings_config.xml

You should see the tag:

<motion>
  <dbox enabled="false" />
  
</motion>

Set the “enabled” value to “true” to allow the game to output to your D-BOX motion platform. Note that any changes made within the game when it is running will overwrite any changes made manually.

 

How can I disable in-game support for LED device?

The F1 game has native support for some of the basic features supported by some external LED devices, such as the Leo Bodnar SLI Pro and the Fanatec steering wheels. To avoid conflicts between Codemasters’ implementation and any third-party device managers on the PC platform it may be necessary to disable the native support. This is done using the following led_display flags in the hardware_settings_config.xml. The file is located here (after an initial boot of the game):

...\Documents\My Games\<game_folder>\hardwaresettings\hardware_settings_config.xml

 

The flags to enabled/disable LED output are:

<led_display fanatecNativeSupport="true" sliProNativeSupport="true" />

 

The sliProNativeSupport flag controls the output to SLI Pro devices. The fanatecNativeSupport flag controls the output to Fanatec (and some related) steering wheel LEDs. Set the values for any of these to “false” to disable them and avoid conflicts with your own device manager.

 

Please note there is an additional flag to manually control the LED brightness on the SLI Pro:

<led_display sliProForceBrightness="127" />

This option (using value in the range 0-255) will be ignored when setting the sliProNativeSupport flag to “false”.

Also note it is now possible to edit these values on the fly via the Game Options->Settings->UDP Telemetry Settings menu.

 

Can I configure the UDP output using an XML File?

PC users can edit the game’s configuration XML file to configure UDP output. The file is located here (after an initial boot of the game):

       

...\Documents\My Games\<game_folder>\hardwaresettings\hardware_settings_config.xml

You should see the tag:

<motion>
  ...     
  <udp enabled="false" broadcast=”false ip="127.0.0.1" port="20777" sendRate=”20 format=”2020 yourTelemetry="restricted" />
  ...  
</motion>

Here you can set the values manually. Note that any changes made within the game when it is running will overwrite any changes made manually.

Edited by Hoo
Updated list of changes for this year (see edit history)

Share this post


Link to post
Share on other sites

Appendices

Here are the values used for the team ID, driver ID and track ID parameters.

N.B. Driver IDs in network games differ from the actual driver IDs. All the IDs of human players start at 100 and are unique within the game session, but don’t directly correlate to the player.

Team IDs

ID

Team

ID

Team

ID

Team

0

Mercedes

21

Red Bull 2010

42

Art GP ’19

1

Ferrari

22

Ferrari 1976

43

Campos ’19

2

Red Bull Racing

23

ART Grand Prix

44

Carlin ’19

3

Williams

24

Campos Vexatec Racing

45

Sauber Junior Charouz ’19

4

Racing Point

25

Carlin

46

Dams ’19

5

Renault

26

Charouz Racing System

47

Uni-Virtuosi ‘19

6

Alpha Tauri

27

DAMS

48

MP Motorsport ‘19

7

Haas

28

Russian Time

49

Prema ’19

8

McLaren

29

MP Motorsport

50

Trident ’19

9

Alfa Romeo

30

Pertamina

51

Arden ’19

10

McLaren 1988

31

McLaren 1990

53

Benetton 1994

11

McLaren 1991

32

Trident

54

Benetton 1995

12

Williams 1992

33

BWT Arden

55

Ferrari 2000

13

Ferrari 1995

34

McLaren 1976

56

Jordan 1991

14

Williams 1996

35

Lotus 1972

 

 

15

McLaren 1998

36

Ferrari 1979

 

 

16

Ferrari 2002

37

McLaren 1982

 

 

17

Ferrari 2004

38

Williams 2003

 

 

18

Renault 2006

39

Brawn 2009

 

 

19

Ferrari 2007

40

Lotus 1978

 

 

20

McLaren 2008

41

F1 Generic car

 255

My Team 

 

Driver IDs

ID

Driver

ID

Driver

ID

Driver

0

Carlos Sainz

37

Peter Belousov

70

Rashid Nair

1

Daniil Kvyat

38

Klimek Michalski

71

Jack Tremblay

2

Daniel Ricciardo

39

Santiago Moreno

74

Antonio Giovinazzi

6

Kimi Räikkönen

40

Benjamin Coppens

75

Robert Kubica

7

Lewis Hamilton

41

Noah Visser

78

Nobuharu Matsushita

9

Max Verstappen

42

Gert Waldmuller

79

Nikita Mazepin

10

Nico Hulkenburg

43

Julian Quesada

80

Guanya Zhou

11

Kevin Magnussen

44

Daniel Jones

81

Mick Schumacher

12

Romain Grosjean

45

Artem Markelov

82

Callum Ilott

13

Sebastian Vettel

46

Tadasuke Makino

83

Juan Manuel Correa

14

Sergio Perez

47

Sean Gelael

84

Jordan King

15

Valtteri Bottas

48

Nyck De Vries

85

Mahaveer Raghunathan

17

Esteban Ocon

49

Jack Aitken

86

Tatiana Calderon

19

Lance Stroll

50

George Russell

87

Anthoine Hubert

20

Arron Barnes

51

Maximilian Günther

88

Guiliano Alesi

21

Martin Giles

52

Nirei Fukuzumi

89

Ralph Boschung

22

Alex Murray

53

Luca Ghiotto

 

 

23

Lucas Roth

54

Lando Norris

 

 

24

Igor Correia

55

Sérgio Sette Câmara

 

 

25

Sophie Levasseur

56

Louis Delétraz

 

 

26

Jonas Schiffer

57

Antonio Fuoco

 

 

27

Alain Forest

58

Charles Leclerc

 

 

28

Jay Letourneau

59

Pierre Gasly

 

 

29

Esto Saari

62

Alexander Albon

 

 

30

Yasar Atiyeh

63

Nicholas Latifi

 

 

31

Callisto Calabresi

64

Dorian Boccolacci

 

 

32

Naota Izum

65

Niko Kari

 

 

33

Howard Clarke

66

Roberto Merhi

 

 

34

Wilheim Kaufmann

67

Arjun Maini

 

 

35

Marie Laursen

68

Alessio Lorandi

 

 

36

Flavio Nieves

69

Ruben Meijer

 

 

 

Track IDs

ID

Track

0

Melbourne

1

Paul Ricard

2

Shanghai

3

Sakhir (Bahrain)

4

Catalunya

5

Monaco

6

Montreal

7

Silverstone

8

Hockenheim

9

Hungaroring

10

Spa

11

Monza

12

Singapore

13

Suzuka

14

Abu Dhabi

15

Texas

16

Brazil

17

Austria

18

Sochi

19

Mexico

20

Baku (Azerbaijan)

21

Sakhir Short

22

Silverstone Short

23

Texas Short

24

Suzuka Short

25

Hanoi

26

Zandvoort

 

Nationality IDs

ID

Nationality

ID

Nationality

ID

Nationality

1

American

31

Greek

61

Panamanian

2

Argentinean

32

Guatemalan

62

Paraguayan

3

Australian

33

Honduran

63

Peruvian

4

Austrian

34

Hong Konger

64

Polish

5

Azerbaijani

35

Hungarian

65

Portuguese

6

Bahraini

36

Icelander

66

Qatari

7

Belgian

37

Indian

67

Romanian

8

Bolivian

38

Indonesian

68

Russian

9

Brazilian

39

Irish

69

Salvadoran

10

British

40

Israeli

70

Saudi

11

Bulgarian

41

Italian

71

Scottish

12

Cameroonian

42

Jamaican

72

Serbian

13

Canadian

43

Japanese

73

Singaporean

14

Chilean

44

Jordanian

74

Slovakian

15

Chinese

45

Kuwaiti

75

Slovenian

16

Colombian

46

Latvian

76

South Korean

17

Costa Rican

47

Lebanese

77

South African

18

Croatian

48

Lithuanian

78

Spanish

19

Cypriot

49

Luxembourger

79

Swedish

20

Czech

50

Malaysian

80

Swiss

21

Danish

51

Maltese

81

Thai

22

Dutch

52

Mexican

82

Turkish

23

Ecuadorian

53

Monegasque

83

Uruguayan

24

English

54

New Zealander

84

Ukrainian

25

Emirian

55

Nicaraguan

85

Venezuelan

26

Estonian

56

North Korean

86

Welsh

27

Finnish

57

Northern Irish

87

Barbadian

28

French

58

Norwegian

88

Vietnamese

29

German

59

Omani

 

 

30

Ghanaian

60

Pakistani

 

 

 

Surface types

These types are from physics data and show what type of contact each wheel is experiencing.

ID

Surface

0

Tarmac

1

Rumble strip

2

Concrete

3

Rock

4

Gravel

5

Mud

6

Sand

7

Grass

8

Water

9

Cobblestone

10

Metal

11

Ridged

 

 

 

Button flags

These flags are used in the telemetry packet to determine if any buttons are being held on the controlling device. If the value below logical ANDed with the button status is set then the corresponding button is being held.

Bit Flag

Button

0x0001

Cross or A

0x0002

Triangle or Y

0x0004

Circle or B

0x0008

Square or X

0x0010

D-pad Left

0x0020

D-pad Right

0x0040

D-pad Up

0x0080

D-pad Down

0x0100

Options or Menu

0x0200

L1 or LB

0x0400

R1 or RB

0x0800

L2 or LT

0x1000

R2 or RT

0x2000

Left Stick Click

0x4000

Right Stick Click

 

Penalty types

ID

Penalty meaning

0

Drive through

1

Stop Go

2

Grid penalty

3

Penalty reminder

4

Time penalty

5

Warning

6

Disqualified

7

Removed from formation lap

8

Parked too long timer

9

Tyre regulations

10

This lap invalidated

11

This and next lap invalidated

12

This lap invalidated without reason

13

This and next lap invalidated without reason

14

This and previous lap invalidated

15

This and previous lap invalidated without reason

16

Retired

17

Black flag timer

 

Infringement types

ID

Infringement meaning

0

Blocking by slow driving

1

Blocking by wrong way driving

2

Reversing off the start line

3

Big Collision

4

Small Collision

5

Collision failed to hand back position single

6

Collision failed to hand back position multiple

7

Corner cutting gained time

8

Corner cutting overtake single

9

Corner cutting overtake multiple

10

Crossed pit exit lane

11

Ignoring blue flags

12

Ignoring yellow flags

13

Ignoring drive through

14

Too many drive throughs

15

Drive through reminder serve within n laps

16

Drive through reminder serve this lap

17

Pit lane speeding

18

Parked for too long

19

Ignoring tyre regulations

20

Too many penalties

21

Multiple warnings

22

Approaching disqualification

23

Tyre regulations select single

24

Tyre regulations select multiple

25

Lap invalidated corner cutting

26

Lap invalidated running wide

27

Corner cutting ran wide gained time minor

28

Corner cutting ran wide gained time significant

29

Corner cutting ran wide gained time extreme

30

Lap invalidated wall riding

31

Lap invalidated flashback used

32

Lap invalidated reset to track

33

Blocking the pitlane

34

Jump start

35

Safety car to car collision

36

Safety car illegal overtake

37

Safety car exceeding allowed pace

38

Virtual safety car exceeding allowed pace

39

Formation lap below allowed speed

40

Retired mechanical failure

41

Retired terminally damaged

42

Safety car falling too far back

43

Black flag timer

44

Unserved stop go penalty

45

Unserved drive through penalty

46

Engine component change

47

Gearbox change

48

League grid penalty

49

Retry penalty

50

Illegal time gain

51

Mandatory pitstop

Share this post


Link to post
Share on other sites

Hello,

Thanks for the release few days before like you told us. It's pretty cool.

I don't have access to the beta, so i have some ask. (or can i get a code to try to play with telemetry ? 😄 )

1. The packet 9 with lobby data is almost the same than the 4. But no driver id, no carnumber.

1.1 We can know there are spectator on it and retrieve the spectator data ?
1.2 Why this choice to "double" the data and don't put all in the same packet ?

 

----

it's normal than the  m_suggestedGear in packet 6 are not in each array for each racer ?? I am surprise to see it outside the [22]

----

Amazing for penalties. but
The 5 seconds penalty are they add and delete from m_penalties in packet 2 or not ? In my idea, when a racer take 5 seconds, you put the 5 second in, and when he make his pit stop, you delete the 5 seconds. But it doesn't work like that in 2019. It's working how in 2020

-----

uint8     m_tyreStintsActual[8];   // Actual tyres used by this driver
    uint8     m_tyreStintsVisual[8];   // Visual tyres used by this driver

8 for the array ? Why ? it's not 4 ? RL,RR, FL,FR ?

 

----

in 2019, each racer who put his telemetry public, when he close the game and come back, the setting is in public, but in reality he came on restricted. Have you fix this behavior ?

----

uint8           m_numWeatherForecastSamples; // Number of weather samples to follow
    WeatherForecastSample m_weatherForecastSamples[20];   // Array of weather forecast samples

I am lost with that. Can you try to explain me ? The weather is cut in 20 "times" and each time is the weather ? we can know with telemetry which weather it will be ??

 

Thanks by advance to take time to answer me. I am pretty sure you already do on the beta forum, but i didnt have access on it 😄

 

Best regards
 

Share this post


Link to post
Share on other sites
Posted (edited)

Looking at the definition for WeatherForecastSample, it has a time offset in minutes. So you would get N forecast samples (up to 20), and then you could tell with the offset when they are supposed to apply.

I'm really happy to see penalties broken down in this way. I'm also hoping that spectators can now receive events like fastest lap and all of the other events they do not receive in 2019. Thanks for the good work.

EDIT: Here are some suggested fixes:

  • uint32 and double are missing from the types
  • In *CarSetupData*, the comment for the m_rearAntiRollBar field refers to the front anti roll bar.
  • In *PacketMotionData*, the fields for m_angularAccelerationX, Y, Z refers to velocity rather than acceleration.
  • Driver 34's name is Wilhelm Kaufmann
Edited by gparent

Share this post


Link to post
Share on other sites
Posted (edited)

Thank you very much for posting the 2020 specifications. 

There were 2 things that already bothered me about the 2019 though, which are still present:

- There is no rewind independent total session time. SessionTime keeps going forward even when a flashback was used. This and the fact you can't check flashbacks directly, make it very hard to determinate flashbacks.

- A field for game version would be nice. If I choose the 2019 format in F1 2020 it is not possible for a program to know if the data coming in is F1 2019 on 2019 format or F1 2020 on 2019 format. This is important to know because the games still got different tracks, teams and drivers.

Edited by bbbox

Share this post


Link to post
Share on other sites

can i get a beta key for ps4 or not because i pre orderd the game but i cant wait to thest the game

 

Share this post


Link to post
Share on other sites
On 7/3/2020 at 5:06 PM, bbbox said:

Thank you very much for posting the 2020 specifications. 

There were 2 things that already bothered me about the 2019 though, which are still present:

- There is no rewind independent total session time. SessionTime keeps going forward even when a flashback was used. This and the fact you can't check flashbacks directly, make it very hard to determinate flashbacks.

- A field for game version would be nice. If I choose the 2019 format in F1 2020 it is not possible for a program to know if the data coming in is F1 2019 on 2019 format or F1 2020 on 2019 format. This is important to know because the games still got different tracks, teams and drivers.

You could potentially use SessionPackets time remaining to determine if flasback was used 😉

 

Share this post


Link to post
Share on other sites
Posted (edited)

Hello,

on packet 2, i receive a 7 for m_resultStatus but in your details, the value max is 6. I receive a 7 for a car who are not racing (broken car  or disqualied).

on unranked lobby, the car number who is send in packet 4 are not good. You send the official's car number. But it was the racer number you were send in 2019. Can we get the racer number and not the official number ?

Thx

Edited by ThibaudPHP
correction

Share this post


Link to post
Share on other sites
On 7/2/2020 at 12:55 PM, BarryBL said:

struct ParticipantData { uint8 m_aiControlled; // Whether the vehicle is AI (1) or Human (0) controlled

Hello!

During Time Trial events, beside the user, there are 19 other participants which are ghost cars. It would be great if m_aiControlled field had two more possible values:

- user ghost

- other player ghost.

If there were such values,

m_driverStatus

field of LapData packet could have value 'Active' for visible ghosts.

Share this post


Link to post
Share on other sites

Hi guys,

it looks like m_surfaceType[4] (Driving surface) in the Car Telemetry Packet is always 0 if 2020 format selected in the game settings.

Could anybody please check?

Share this post


Link to post
Share on other sites
18 hours ago, SimShaker said:

Hi guys,

it looks like m_surfaceType[4] (Driving surface) in the Car Telemetry Packet is always 0 if 2020 format selected in the game settings.

Could anybody please check?

Yes, I can confirm this - it is always 0.

  • Thanks 1

Share this post


Link to post
Share on other sites
Posted (edited)
On 7/2/2020 at 8:19 PM, ThibaudPHP said:

 


uint8     m_tyreStintsActual[8];   // Actual tyres used by this driver
    uint8     m_tyreStintsVisual[8];   // Visual tyres used by this driver

8 for the array ? Why ? it's not 4 ? RL,RR, FL,FR ?

This arrays shows you the used tyre-types in the race. E.g.: Start with soft, a few laps later wets, the end of the race with hard tyres. You will get then:

m_tyreStintsActual[0]=id for soft

m_tyreStintsActual[1]=id for wet

m_tyreStintsActual[2]=id for hard

Kind regards,

Mark

Edited by markundsteffi
  • Like 1

Share this post


Link to post
Share on other sites
Posted (edited)

There are some team ids missing from the appendix;

 53 = Benetton1994
 54 = Benetton1995
 55 = Ferrari2000
 56  =Jordan1991

Also m_drsAllowed is listed as uint8 but with a value of -1 for unknown, is this actually an int8?

Edited by Bassetts

Share this post


Link to post
Share on other sites
Posted (edited)
8 hours ago, Bassetts said:

There are some team ids missing from the appendix;

 53 = Benetton1994
 54 = Benetton1995
 55 = Ferrari2000
 56  =Jordan1991

Also m_drsAllowed is listed as uint8 but with a value of -1 for unknown, is this actually an int8?

The team IDs are in the appendix already, at the bottom of the third column.

Edited by gparent

Share this post


Link to post
Share on other sites

There are still some IDs missing in Appendix: 63-65, 81-84.

They appear as ghost cars in time trial events.

Share this post


Link to post
Share on other sites
On 7/11/2020 at 4:54 AM, gparent said:

The team IDs are in the appendix already, at the bottom of the third column.

I copied the wrong values, my bad. The ones that are missing are

63 = Ferrari 1990
64 = McLaren 2010
65 = Ferrari 2010

Share this post


Link to post
Share on other sites
16 hours ago, Bassetts said:

I copied the wrong values, my bad. The ones that are missing are

63 = Ferrari 1990
64 = McLaren 2010
65 = Ferrari 2010 

No worries and thanks a lot for providing the values.

Share this post


Link to post
Share on other sites
On 7/5/2020 at 7:59 PM, ThibaudPHP said:

Hello,

on packet 2, i receive a 7 for m_resultStatus but in your details, the value max is 6. I receive a 7 for a car who are not racing (broken car  or disqualied).

 on unranked lobby, the car number who is send in packet 4 are not good. You send the official's car number. But it was the racer number you were send in 2019. Can we get the racer number and not the official number ?

Thx

I also got that value when Bottas' engine broke in an offline race, can someone explain the difference with "6" which is supposed to be "retired"?

Share this post


Link to post
Share on other sites

@BarryBL

Can you provide Sector 3 time from the last lap? There seems to be some inconsistency in the data. 

When I tried to calculate the Sector 3 time by subtracting the other two sectors from the lap time, there seems to be an inconsistency of two thousandths. This is quite significant for my project as we are developing a purple/green sector display. 

Share this post


Link to post
Share on other sites
On 7/14/2020 at 4:24 PM, Poulpix said:

I also got that value when Bottas' engine broke in an offline race, can someone explain the difference with "6" which is supposed to be "retired"?

I am also seeing this when Giovinnazzi DNF's with "Mechanical Failure"

Share this post


Link to post
Share on other sites
On 7/5/2020 at 7:59 PM, ThibaudPHP said:

Hello,

on packet 2, i receive a 7 for m_resultStatus but in your details, the value max is 6. I receive a 7 for a car who are not racing (broken car  or disqualied).

I experience weird behaviour with m_resultStatus as well. Received a 7 on multiple occassions and always receive a 4 (DSQ) when it should be a 6 (DNF) on the Final classification packet.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×