Jump to content
Christmas Period - Codemasters Staff and Support Read more... ×

Archived

This topic is now archived and is closed to further replies.

T3PA Pedals

Recommended Posts

Using t3pa pedals with thrustmaster Tx and f1 rimon Xbox one. I have the brake mode applied to the pedal set. The problem I'm having is that the when I press all the way down on the brake pedal the game doesn't recognise I've pushed all the way down and the car brakes as if I'm applying about 40% pressure. Does anyone else have this problem? I don't see a way to calibrate the pedals in the settings like on other games. I've been using the standard TX pedals on this game and I'm fine with that, but I'd rather use the t3pa's.

Share this post


Link to post
Share on other sites
i had a similar issue (same wheel and pedals) and fixed it by setting my acceleration and brake saturation from 1.0 to 0.0 in that xml file in the actionmaps folder. (make sure you change it for the TM F1 entry)

edit: oops sorry, didnt see that you are on Xbox

Share this post


Link to post
Share on other sites
I can't say I'm having the same issue as you, and I'm also using the T3PA pedals with the TX wheel on XB1. Have you tried altering the brake mod to allow for more pedal travel?

Sometimes I have noticed when I first boot up the game I struggle to slow for corners but applying more pressure to the pedal locks the brakes, think of it as 'calibrating my left foot' ;)

Also might be worth asking, are you using ABS?

Share this post


Link to post
Share on other sites
ARusling said:
I can't say I'm having the same issue as you, and I'm also using the T3PA pedals with the TX wheel on XB1. Have you tried altering the brake mod to allow for more pedal travel?

Sometimes I have noticed when I first boot up the game I struggle to slow for corners but applying more pressure to the pedal locks the brakes, think of it as 'calibrating my left foot' ;)

Also might be worth asking, are you using ABS?
Yeh I've got the mod as back as far it goes. Not using ABS and the little time I did try to use the pedals I intentionally tried to lock up the brakes, but like I said it felt like no brake pressure was applied to the car

Share this post


Link to post
Share on other sites
BenR34 said:
Yeh I've got the mod as back as far it goes. Not using ABS and the little time I did try to use the pedals I intentionally tried to lock up the brakes, but like I said it felt like no brake pressure was applied to the car
That's odd! Have you tried increasing the brake sensitivity in settings?

Share this post


Link to post
Share on other sites
My mate had a similar issue on his Thrustmaster T500RS pedals. A while back we changed the springs around on the clutch and brakes, so he could use the clutch as the brake pedal instead. On PS3 it was fine, on the PS4 though it had the same issue as the original poster is talking about! Turns out the little activator switch that moves when you move the pedals wasent set in the correct position.

I dont know if you pedals have the same thing, but its worth having a look.

Share this post


Link to post
Share on other sites
I have left several comments about this same issue. There is no brake saturation slider nor pedal calibration tool. The only way to make this playable is to use brake assist and that is bearable but unrealistic and spoils the feel. I have never been able to lock the brakes in this game, at best I get 50 % braking

Share this post


Link to post
Share on other sites

×