Jump to content

Archived

This topic is now archived and is closed to further replies.

Fanatec CSR Elite Pedals won#t work

Recommended Posts

I have a Fanatec CSR Elite Wheel and CSR Elite Pedals. The wheel works well, but since the 0.6 update, they don't work with Dirt Rally. When i press the gas or brake pedal in the calibration, the window closes. by pressing the clutch pedal in the calibration, nothing happens. I installed the Fanatec 222(Beta)-driver for win 10, but nothing canged.
The pedals work fine with other games like R3E or Assetto Corsa. It's only Dirt Rally.

Share this post


Link to post
Share on other sites
i have the latest version.
there is a 226 driver version out now, maybe this works. i will try, when i come home today.

Share this post


Link to post
Share on other sites
driver version 226 and re-install dirt rally didn't solve the problem. but then i put the pedals directly into the wheel and it worked. but thats not the way it should be. fanatec says, that you have to put the pedals and wheel seperately into the pc in pc mode. wheel in pc and pedals in the wheel could cause damage to the wheel.

before 0.6 the right setup worked, but since then, the pedals weren't identified as pedals.

Share this post


Link to post
Share on other sites

×