Jump to content Jump to content

Share Your Wheel Settings Here

Recommended Posts

  • 2 weeks later...
  • 3 weeks later...
Fanatec GT3 RS V2 w/ CSR Elite pedals here.
On wheel : Sen 300 / FF 100 / Sho 000 / Dri Off / Abs Off / Lin 000 / Dea 000 / Spr 0 / Dpr -3
In-Game all is set to 0 Deadzone and 100 Sensitivity, Wheel Linarity at 0, All 3 FFB options at 50% (really down to personal preference on the FFB)
This is same settings I've been using for all the Codies games; F1 2013 and DiRT2 being the others I regularly play.  Think I found these (wheel) settings in an "official" settings thread (by Codies) the old F1 2013 forums (before the forum refresh occurred).

Link to comment
Share on other sites

  • 1 month later...
Hello all, i have just bought a g27 and can not get my settings to save, my global profiler settings and global device settings stay the same but in game they dont, i know about starting game with control pad otherwise it does not save/work but i cant start the game with steering wheel only the butons on the gear stick and i then have to remap all my buttons again
any ideas!
Link to comment
Share on other sites

  • 2 weeks later...
  • 2 months later...
Here are my settings for the T300RS.

T300RS Control Panel: 

GRID Autosport:

Steering Deadzone 0%
Steering Saturation 100%
Steering Linearity 0
Throttle Deadzone 0%
Throttle Saturation 100%
Brake Deadzone 0%
Brake Saturation 100%

Vibration Strength: 50%
Wheel Strength: 100%
Wheel Weight: 50%


<!-- Thrustmaster T300 RS -->
  <FFBDevice name="{B66E044F-0000-0000-0000-504944564944}" scaleForce="0.9" scaleFriction="0.25" baseFriction="0.0" maxFriction="25.0" scaleEffects="1.0" delay="0.0"/>
Link to comment
Share on other sites

  • 4 weeks later...
xAce28x said:

After some experimentation, it would seem that this wave of 2738 and envelope of 987 is trying to simulate the feeling of tarmac under the tyres. When the wheels lock up, this comes into play more forcefully as the tyres drag along the tarmac. This is what you feel as you lock the wheels. This makes sense with a wheelscale of 0.85. For the standard tarmac vibrations however, I think the intention may have been to use this, but at a much lower level, hence the unused line with wheelscale of 0.001:


<!-- Hard Surfaces-->
<FFBSample name="tarmac" wave="2738" envelope="987" wheelScale="0.1" skid="1.25"/>

I would recommend replacing the original line in your Autosport effects file with this one and try it out. To increase or reduce the texture of the tarmac coming through the wheel, alter the wheelscale parameter higher or lower to your preference. 

Hope this works for others like it worked for me!


Founded some additions to effectsetup.xml at steam GA forums, thanks to toix:

Enable Force Feedback on gear change

Change line ~282 of effectsetup.xml:
 <FFBSample name="gearChange" wave="1111199999" envelope="9876543210" channel="0" wheelScale = "0.3"/> 

Wave reference and envelope reference are taken from GRID 1 gear change. © toix's guide

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 years later...
Hello. I ve grid autosport on PS3 and now on xbox360. I play with fanatec csr forza4 wheel. And There is a différence between PS3 race feeling and xbox360 race feeling. On PS3 i feel all the deformation if the track, not on xbox360, Where i only feel vibrations when i am out of the track. Do you know why ?
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...