MagicDoorHinge 0 Posted November 15, 2015 Hello. I have played this game for about 60 hours with the G27 with H shifter and clutch. I have noticed that the clutch seems to be very on/off (as if when a certain percentage of the clutch is depressed, the clutch switches from not being engaged at all to being fully engaged). I of course do not drive a race car so I do not know how authentic this feature is, but I feel like I would prefer the clutch to feel more... interactive. I do not expect devs to change anything in the game for it, but I was wondering if anyone out there knows of a program to adjust the linearity of my clutch pedal. JoyToKey and the Logitech Profiler don't seem to have any settings to adjust this.Some games, like I think WarThunder, have an in game setting so that minute changes in joystick position make minute changes in game, whereas large movements to the joystick make disproportionately large changes in game.Currently in game, depressing the clutch pedal 0% leaves the clutch fully engaged; pressing the pedal 50% puts the in game setting at 50%, and pressing down the pedal 100% leaves the in-game clutch at 100% (ignoring deadzone and saturation settings for now). What I'm looking for is software to adjust my clutch pedal (or any analogue joystick, I guess) saturation curve. So for example, I still want 0% and 100% pedal depression to translate to 0 and 100% clutch setting in game, but when I am halfway out on the pedal, I want the setting the game reads in game to matter more (if that makes sense). Sorry if I'm not explaining myself well :tongue: but thanks in advance for any input anyone has! Share this post Link to post Share on other sites
karik134 6 Posted November 15, 2015 If u put the in game clutch saturation to 50%, then if you press clutch pedal halfway down the game register it as 100% and u'll get less miss-shifts. Is that what u are after, less miss-shifts? Share this post Link to post Share on other sites
MagicDoorHinge 0 Posted November 15, 2015 Hm, not really. I still want the game to only register the clutch as being 100% when the pedal is all the way down. I just want to make the [edit post got cut off] clutch slope non linear. I whipped up a tiny graph to show you guys what I'm talking about available at the following URL:https://gyazo.com/f5767a5f582195fc86b89237472d2b55The dots are what I wish to be able to set my clutch up to do, and the line is what the game currently represents. There must be a piece of third party software to adjust the linearity of an analogue input device so it makes the midrange of the clutch more sensitive without changing the endpoint or start point of the clutch travel Share this post Link to post Share on other sites
DeputyDiRT 0 Posted November 16, 2015 Hello,have you tried using the tool dxtweak? Share this post Link to post Share on other sites